How to customize the grids?
If you are building or renovating your infinity pool, Modulartem can create customized grids for you, with your favorite material.
Modulartem is the only company able to satisfy you in this service.
Whatever material you choose as a coating for the grills of your infinity pool, once you tell us your favorite grid format, we’ll take care of everything, realizing for you your special customized customized grills, with your favorite coating, moreover we are able to guarantee the bonding for 36 months!
How to do it is simple:
contact us and you will immediately receive support from one of our specialized technicians, who will guide you step by step until you get your own customized grid that no one could offer you before.
Only with us will you be able to get a unique environment in the world coordinated at 360 ° Find out how you can also customize our innovative shower trays using the same grids as your pool thanks to Modulartem!
How is the installation of grids - paving?
Laying of the grids: Modulartem grids are the only grids in the world with self-supporting support, able to allow the positioning of the grouting strips parallel to the water, thus improving drainage. The Modulartem grids are light and practical, for this reason the installation can only be simple and fast.
How to do?
Just take the Modulartem grids and place them inside your duct, the Modulartem grids will adapt perfectly and will immediately increase the aesthetic value of your beautiful swimming pool.
Modulartem also recommends starting to lay the grids from the corner pieces to converge towards the center of each side, if the grids do not match perfectly with the side of the duct, it will be enough, with a common site flexible, to cut the “special” grid to size; if you do not have one you can contact your trusted marble worker.
Laying of the Flooring: The refined materials available in the Modulartem range are also offered as flooring, available in many sizes, materials and colors, so as to be able to satisfy everyone’s aesthetic needs.
Modulartem flooring needs, like any floor, of traditional laying through your trusted building contractor. If you are interested in this service, the Modulartem technicians will provide you with all the necessary information to be able to lay our floors.
The Modulartem flooring available are:
Porcelain Stoneware available in 7 colors (also suitable as a pool lining) Cotto Fiorentino in two color variants Marble available in 5 Teak Asia compositions, available on request with water-based protective oil treatment.
Is it possible to have the flooring with the same covering as the grids?
Absolutely, the sought-after materials of the Modulartem range are also offered as flooring, available in many sizes, materials and colors, so as to be able to satisfy everyone’s aesthetic needs, so as to allow you to have a unique, exclusive and design pool environment, coordinated at 360 °.
Ask our architect for advice!
Are you holding the project of your new pool? Do you need to create your new pool from scratch? Are you renovating your new pool and need help?
Our Architect will be able to follow you and help you build the pool you’ve always dreamed of!
Which grid to choose?
Modulartem in addition to shower trays and flooring offers more than 100 different types of grids, to be able to satisfy even the most demanding customers.
To choose the right grill for your swimming pool, first of all identify the precise dimensions of the raceway.
Example: Wireway with width 25cm and height 3.5cm Subsequently it will be necessary to indicate which is the type of grid you prefer which geometry and which height.
Example: Grid 25x50x3,5cm with 2 Elements / Grid 25x25x3,5cm with 5 Elements Finally we move on to the choice of the coating and the color of the plastic support (white or black).
Example: Sand Marble covering with black grid support.
The task of the Modulartem grid, in addition to increasing the aesthetic and practical value of your pool, it is also that of making the water flow properly, so it is logical that; the more joints are present on the grid of your choice, the greater the drainage of water. It is good to know, however, that it is not only the grid that ensures the correct drainage of water, the main factor for a correct drainage is the wave-breaker or the small beach that lies between the grill and the pool.
The greater the width of the Frangi-onda or small beach, the greater the possibility of choosing the grids you like without having to worry about the number of leaks for correct drainage.
Which material should you choose as a coating for your pool?
Modulartem has always offered only high quality coatings with characteristics that are perfectly compatible with the pool environment, both indoors and outdoors.
The Modulartem materials have been chosen, after years of research and experimentation, by our technicians, to be able to guarantee reliability over time while maintaining their splendid aesthetic intact.
Furthermore all the Modulartem materials have an eye on our environment, they are produced and processed with low environmental impact technologies and 100% Made in Italy.
Curvilinear pool how to do?
In the Modulartem sales range there are also the curved grids of the Ellipsis line in two variants, depending on the preference of the end customer. Ellipsis line with Key-Stone or keystones that serve as spacers between a strip and the other, these, they make the grid up to standard and are available in 7 different colors.
Ellipsis line without Key-Stone or keystones, ideal for curvilinear conduits, easier to install.
What is the "breakwater"?
It is the part that precedes the grid towards your pool, the wave-breaker or the small beach is the protagonist of the drainage of the water present in your pool, it serves to dampen the waves that are generated inside by your pool, The wider the wave breaker, the greater the drainage capacity of your pool.
Ask our technicians for advice, they will help you choose the grill that best suits your needs!
Do you have the channel with different dimensions compared to the Modulartem grids?
The Modulartem grids adapt perfectly to any height of your duct. If your duct is wider or smaller than our grids, no problem Modulartem is the only company able to satisfy you in this service, we are therefore able to be able to modify the grid, adapting it to the dimensions of your raceway.
Contact us to make your own grill tailored to your needs!
What to do if the grids aren't exactly accurate with my pool length?
Modulartem recommends starting to lay the grids from the corner pieces to converge towards the center of each side and, if the grids do not match perfectly with the side of the duct, it will be enough, with a common construction site flexible, to cut the “special” grid to size. if you do not have one you can contact your trusted marble worker.
So you can saturate the duct while maintaining an impeccable design in Modulartem style on your pool!